A plumber fixing a handwash basin

A Garbage Disposal that doesn’t work properly can be a nightmare. If you want to know what to do when your garbage removal acts up, read this article to find out the best way to fix it. 

1. Check the Circuit Breaker 

The first thing that you need to do is check the circuit breaker. If too much current flows through the garbage removal, it can cause the motor to overheat, causing the circuit breaker to trip. Then you will need to reset it for your garbage removal to start working again. 

2. Check the Power Supply 

If your garbage removal is not working, check if the power supply is turned on. The switch for the power supply should be in the “on” position. If it’s in the “off” position, turn it on and see if your garbage removal starts working. 

3. Remove the Splash Guard 

Remove the splash guard. It is the piece that covers the blades of the disposal. You can usually remove it by pulling it straight up. Once you have removed the splash guard, you should see the flywheel. If it’s jammed, try to free it up by rotating it with your hand. 

4. Use a Hex Key to Remove the Flywheel 

If the flywheel is jammed, you will need to use a hex key to remove it. It is a tool that looks like a T-bar. Insert the hex key into the hole on the disposal side and turn it counterclockwise until it comes loose. 

Once you have removed the flywheel, you should see the impeller. If it’s jammed, try to free it up by rotating it with your hand, and your garbage removal should be working again. 

5. Use a Screwdriver to Remove the Impeller 

If the impeller is jammed, you will need a screwdriver to remove it. It is the piece that looks like a fan. Insert the screwdriver into the hole on the top of the disposal and turn it counterclockwise until it comes loose. 

Once you have removed the impeller, you should see the motor. If it’s jammed, try to free it up by rotating it with your hand. 

6. Remove the Motor 

It is the piece that sits in the middle of the disposal. You can do this by inserting a screwdriver into the hole on top of the disposal and turning it counterclockwise until it comes loose. Once you have removed the motor, you should see the blades. 

If they’re jammed, try to free them up by rotating them with your hand. 

7. Replace the Blades 

If the blades are jammed, you will need to replace them. Insert new ones and reattach the motor, impeller, flywheel, and splash guard. Once you have reassembled the disposal, try turning it on again. 

If your garbage removal is jammed, these are the steps you need to take to fix it. One of these methods will work for you, and you will be able to get your disposal up and running again. Remember, if you’re not comfortable doing this yourself, you can always call a professional in Coconut Creek, FL.