One of the most common kitchen appliances to break is the waste disposal. If your waste disposal is on the fritz, there are a few things you can do to try to fix it before calling a professional. Below are some key tips on how to fix your waste disposal.
1. Check the Breaker Box to Make Sure That the waste Disposal Is Turned on
Sometimes the breaker for the waste disposal gets turned off by accident. If this is the case, flip the switch back on, and voila! Your waste disposal should start working again. When using your waste disposal, always make sure that the breaker is turned on.
2. Use a Plunger to try and Dislodge Any Objects That May Be Stuck in The Disposal
One of the best ways to clean your waste disposal is to use a plunger. Plungers can help dislodge any objects stuck in the disposal, making it easier for the disposal to work properly. If you find that your waste disposal is not working as well as it should, it is essential to call a plumber to look at it.
Vigilante Plumbing is a dependable plumbing services company in Coconut Creek, FL, which can help you fix your waste disposal. We offer plumbing repair & installations, heating repair & installations, and water heater maintenance & repairs. Contact us today to schedule a consultation!
3. Pour a Cup of Vinegar down the Drain to Help Break up Any Clogs
One of the best ways to break up a clog is to pour a cup of vinegar down the drain. The vinegar will help break up any grease or soap that may be causing the clog. If you find that your waste disposal is still not working correctly after trying this tip, it is essential to call a professional plumber. Coconut Creek, FL, is home to many great plumbers who can help you with your disposal problems.
4. Use a Wrench to Loosen the Bolt at The Bottom of the Disposal
If your waste disposal is leaking from the bottom, there’s a good chance that the sealing ring needs to be replaced. You’ll need to remove the disposer from the sink to do this. First, use a wrench to loosen the bolt at the bottom of the unit. Then, disconnect the power supply and drain any remaining water from the disposal.
Once the disposer is removed, unscrew the old sealing ring and screw on a new one. Be sure to reconnect the power supply before testing your disposal to ensure it’s working correctly. With a few simple tools and a little bit of know-how, you can fix your waste disposal in no time.
5. Clean Out All of the Gunk That Has Built Up Inside the Disposal
Lastly, if your waste disposal is still not working, you may need to clean out the entire gunk built up inside the disposal. Remove the plug at the bottom of the disposal and use a flashlight to look inside. If you see any build-up, use a spoon or other utensil to remove it. Once you have removed all of the build-ups, run some cold water through the disposal to flush it out.
Conclusion
As we have seen, there are a few things that you can do to try and fix your waste disposal. By following the tips above, you should be able to get your waste disposal working properly again in no time. However, if you find that your waste disposal is still not working after trying these tips, it is essential to call a professional plumber.
